Designed for recurring work.
Use a defined route when several project packages arrive at once and the same setup is repeated across members.
← ALL PRODUCTSAssembly drawings.
STRIKE ASSEMBLYPILOT / 2.12
Assembly drawings.
Less repetition.
Turn repetitive drawing work into a controlled Tekla workflow. Choose the member, run the drawing or batch, then review the result.
Tekla 2020–2026 Windows x64Drawing + batch Defined processing scopeOne device Fixed-term license
WHO IT IS FOR
Built for specialist steel detailing teams.
AssemblyPilot is for companies with experienced steel detailers and a steady flow of steel projects. It is a production aid for teams carrying repeated drawing packages, not a tool for clients without steel detailing experience.
Need steel detailing support? Contact STRIKE ↗KEEP THE ENGINEER IN CONTROL
Automation does not replace the final review.
The program completes its defined drawing steps; it does not promise a drawing that is 100% ready for issue. A qualified steel detailer must review the result and add the project-specific finishing touches before fabrication release.
SEE IT IN TEKLA
From repeated setup to a repeatable workflow.
Compare the manual drawing routine with an AssemblyPilot run, from setup to the processed drawing, ready for specialist review.
BUILT FOR BUSY DRAWING DESKS
More packages.
Same control.
Process the active drawing or selected drawings in Document Manager. Follow progress, inspect each result and retry failed drawings where supported.
Visible progress.
Review per-drawing results and stop the run at a safe boundary when needed.
Ready for specialist review.
Check views, sections, dimensions and marks as part of your normal drawing release process.
MEMBER-SPECIFIC WORKFLOWS
The right route
for the member.
Explore the same member routes you see in AssemblyPilot. Open a module below to see where to start and what to check.
DrawingsBU Member
Built-up assembly drawing workflows.
Explore workflowClose workflow
01 / START HERE
Choose the built-up route for a matching active drawing or selected drawing batch.
02 / REVIEW THE RESULT
Inspect the processed views, sections, dimensions and marks before release.
DrawingsHR Member
Hot-rolled assembly drawing workflows.
Explore workflowClose workflow
01 / START HERE
Choose the hot-rolled route for matching member drawings, then define the drawing or batch to process.
02 / REVIEW THE RESULT
Check the member geometry, connection details and drawing annotations against the project requirements.
DrawingsStrut
A dedicated route for supported strut drawings.
Explore workflowClose workflow
01 / START HERE
Choose Strut in the Modules panel for the supported strut assembly drawing workflow.
02 / REVIEW THE RESULT
Confirm that the member is supported and check the resulting dimensions and connection details.
From modelAngle
Create drawings from selected angle assemblies.
Explore workflowClose workflow
01 / START HERE
Select the angle assemblies in the model, then use the Angle creation route with the appropriate drawing attributes.
02 / REVIEW THE RESULT
Review the created drawings, orientation and annotations before issuing.
From modelCold Formed
Create drawings for cold-formed members.
Explore workflowClose workflow
01 / START HERE
Select the cold-formed assemblies in the model and use their dedicated route with the appropriate attributes.
02 / REVIEW THE RESULT
Check the section orientation and project-specific drawing details.
From modelSag Rod
Create drawings for selected sag-rod assemblies.
Explore workflowClose workflow
01 / START HERE
Select the sag-rod assemblies and run the Sag Rod route using the saved drawing attributes.
02 / REVIEW THE RESULT
Check the member representation, dimensions and end details in each drawing.
From modelRod Brace
Prepare drawings for rod-bracing assemblies.
Explore workflowClose workflow
01 / START HERE
Select the rod-bracing assemblies in the model, then use the Rod Brace creation route.
02 / REVIEW THE RESULT
Inspect the bracing dimensions and connection details before release.
Hand Rail
Shown in the program roadmap.
Not available in the current release.
Stringer
Shown in the program roadmap.
Not available in the current release.
Every route supports your detailing process. Final checking and project-specific finishing remain with a qualified steel detailer.
BEFORE YOU START
Clear answers.
Confident next steps.
Choose the right workflow and keep specialist review part of every drawing release.
Talk to STRIKEWhich workflow should I choose?
Choose BU Member for built-up members, HR Member for hot-rolled members, or Strut for the supported strut drawing workflow. Angle, Cold Formed, Sag Rod and Rod Brace start from selected model assemblies. The module guide above explains each route.
Can I process several drawings?
Yes. The drawing processors support the active drawing or a selected batch. Progress and results make the processed scope visible. Check that each drawing matches the selected member route before running a batch.
Does it replace drawing checking?
No. AssemblyPilot automates defined production steps. A qualified steel detailer must review, adjust and approve the result against the project requirements before issuing drawings.
How do I get help?
Email info@strike-eng.com with your product version and the steps that produced the issue. You can also report a problem with screenshots.
STRIKE ASSEMBLYPILOT
Less repetition.
More control.
A focused drawing workflow for specialist steel detailing teams managing busy project packages.
YOUR NEXT DRAWING RUN
Choose your license term at checkout.
One device · No automatic renewal.